How to Troubleshoot and also Fix an Electric Water Heater
How to Troubleshoot and also Fix an Electric Water Heater
Blog Article
Everybody seems to have their private piece of advice on the subject of What Would Cause My Electric Water Heater to Stop Working?.
Numerous modern-day homes use an electrical water heater for their heater, as a result of its convenience as well as convenience of use. However, similar to any other electric home appliances, troubles might occur with its use, all of a sudden. It can be really discouraging to awaken to a cool shower instead of a warm one or having your bathroom with water that isn't hot sufficient or perhaps also hot. Whatever the situation might be, water heater problems can be rather aggravating. Fortunately, we've made a listing of possible remedies to your water heater issues. There are a number of aspects that can cause much of these troubles, it could be an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you turn off the main power supply for security. Whatever the issue is, getting it taken care of must not posture way too much of an issue if you follow these steps:
Call An Expert:
If after changing all malfunctioning components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to speak to a specialist plumber for a professional opinion. The problem with your heater could be that the hot and cold taps have been changed or it may be undersized for the quantity of warm water required in your house. Whatever the instance might be, a specialist plumber would certainly aid address the trouble.
Examine Your Power Supply:
As standard as this might appear, it is very necessary. Without adequate power, your water heater will not function. So the first thing to do when your water suddenly retires is to validate that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, just turn it off and on again. Change any kind of busted or damaged fuse. Test the appliance with power after these adjustments to see if it's currently functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you may need to examine the temperature level setups on your upper thermostat. Ensure the breaker is turned off prior to doing anything. Open the access panel and also press the red button for temperature reset over the thermostat. This must assist heat the water. Transform the breaker back on as well as check if the problem has actually been fixed.
Check the Burner in the Hot Water Heater:
If it's not a power issue, then try looking into your heating element if it is still working. Examine each of your burner to be sure the trouble isn't with any one of them. If any of them is faulty, change that part and after that check whether the warm water is back on.
Final thought
Water heater troubles are not always significant. Much of them are because of small problems like a blown fuse or worn-out burner. Replacing the damaged components ought to suffice. Nevertheless, if you are still unable to fix the problem, give a call to your local plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was brought to that editorial on How to Troubleshoot and Repair an Electric Water Heater from a good friend on our other blog. Sharing is caring. One never knows, you may be doing someone a favor. Kudos for your time. Visit us again soon.
Get A Quote
Report this page